名称：JB-WCDZ Microcomputer Controlled Ultra-low Temperature Automatic Impact Testing Machine返回
作者：莱洛特 来源：莱洛特 时间：2022-01-13 浏览次数：
The impact testing machine is used to test the impact resistance of metal materials at low temperature. It is reasonable in layout, effectively reduces the deformation of main shaft and greatly reduces the energy loss caused by bearing friction; It is a necessary testing instrument for metallurgy, machinery manufacturing and other units. It is also a necessary testing instrument for scientific research units to carry out new material O. the hammer is lifted by reducer motor, and the operation is stable; Research is an indispensable testing instrument.
The three-dimensional software of pendulum is precisely designed to ensure the accuracy of strike center and pendulum torque; The machine is controlled by PLC. The swing, hanging swing, feeding, positioning, impact and temperature adjustment impact knife is installed and fixed by screws, which is simple and convenient to replace; Section settings are electrical and mechanical control. Equipped with special feeding device for automatic feeding and sample.
The main engine is equipped with safety protection pins and safety protection nets to ensure the safety of the test; Automatic end face positioning. The impact time from the sample out of the furnace to the impact is not more than 2 seconds, which meets the requirements of metal low temperature impact testing machine and Charpy impact test method in accordance with the national standard GB / t3808-2002 inspection of pendulum impact testing machine. After impacting the sample, the residual energy can be used for automatic lifting. The metal pendulum can be prepared for the next test according to the national standard GB / t229-2007 metal Charpy pendulum impact test method, with high work efficiency; Impact test of materials.
The three-dimensional software of pendulum is precisely designed to ensure the accuracy of strike center and pendulum torque; The machine is controlled by PLC. The swing, hanging swing, feeding, positioning, impact and temperature adjustment impact knife is installed and fixed by screws, which is simple and convenient to replace; Section settings are electrical and mechanical control. Equipped with special feeding device for automatic feeding and sample.
The main engine is equipped with safety protection pins and safety protection nets to ensure the safety of the test; Automatic end face positioning. The impact time from the sample out of the furnace to the impact is not more than 2 seconds, which meets the requirements of metal low temperature impact testing machine and Charpy impact test method in accordance with the national standard GB / t3808-2002 inspection of pendulum impact testing machine. After impacting the sample, the residual energy can be used for automatic lifting. The metal pendulum can be prepared for the next test according to the national standard GB / t229-2007 metal Charpy pendulum impact test method, with high work efficiency; Impact test of materials.
WAP端
阿里巴巴
淘宝
