名称：HLN-180 Leeb Hardness Tester返回
作者：莱洛特 来源：莱洛特 时间：2022-01-13 浏览次数：
Measuring range 70-100HRE, 50-115HRL, 50-115HRM,50-115HRR
Major load 588.4, 980.7, 1471N (60, 100, 150kgf)
Max test height 170mm
Depth of throat 135mm
Hardness resolution 0.5HR
Dimension 466 x 238 x 630mm
Approx.weight 65kg
Standard configuration:
Large flat anvil: 1 pc.
Small flat anvil: 1 pc.
V-notch anvil: 1 pc.
Ball indentor: Φ3.175mm/Φ6.35mm/Φ12.7mm
Standard plastic Rockwell block : 4pcs
Measuring materials: hardness measurement of steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel and other materials.
Unique features: equipped with high-precision D-type sensor, with support frame, bright large screen and no viewing angle.
Main purpose:
machining industry, especially suitable for on-site hardness test of large parts and non removable parts
hardness of installed mechanical or permanently assembled parts.
mold cavity hardness.
hardness of heavy workpiece
failure analysis of pressure vessel, steam turbine generator unit and its equipment
workpiece hardness with narrow experimental space
hardness of bearings and other parts
material differentiation of metal material warehouse
Rapid detection of multiple measuring parts in a large range of large workpieces
Functional features:
Design basis and standard: technical conditions of Leeb hardness tester JB / T 9378-2001; D-type high-precision impact device is adopted;
full Chinese display and menu operation.
it can be equipped with 7 different impact devices, which do not need to be recalibrated during replacement, and can automatically identify the type of impact device.
support measuring various hardness systems.
it can store 373 ~ 2688 groups (impact times 32 ~ 1) of single measurement value, average value, measurement date, impact direction, times, material, hardness system and other information.
The upper and lower limits of hardness value can be set in advance, and the alarm will be given automatically when the limit is exceeded, which is convenient for users to test in batches.
indication software calibration function.
two AA batteries are used, which is convenient and efficient.
Ultra low power management, with long working and standby time.
Technical parameters:
Standard configuration:
one Hardness tester host 1 set
two Impact device 1 Type D
three Leeb hardness block 1 piece
four Nylon brush a 1
five Small support ring 1
six USB communication cable Article 1
an instruction manual 1 copy
eight certificate 1 sheet
nine warranty card 1 sheet ten Instrument box 1
eleven Alkaline battery No. 5 Section 2 Non aviation
Select configuration：
one Communication software CD
two Print cable
three printer
Major load 588.4, 980.7, 1471N (60, 100, 150kgf)
Max test height 170mm
Depth of throat 135mm
Hardness resolution 0.5HR
Dimension 466 x 238 x 630mm
Approx.weight 65kg
Standard configuration:
Large flat anvil: 1 pc.
Small flat anvil: 1 pc.
V-notch anvil: 1 pc.
Ball indentor: Φ3.175mm/Φ6.35mm/Φ12.7mm
Standard plastic Rockwell block : 4pcs
Measuring materials: hardness measurement of steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel and other materials.
Unique features: equipped with high-precision D-type sensor, with support frame, bright large screen and no viewing angle.
Main purpose:
machining industry, especially suitable for on-site hardness test of large parts and non removable parts
hardness of installed mechanical or permanently assembled parts.
mold cavity hardness.
hardness of heavy workpiece
failure analysis of pressure vessel, steam turbine generator unit and its equipment
workpiece hardness with narrow experimental space
hardness of bearings and other parts
material differentiation of metal material warehouse
Rapid detection of multiple measuring parts in a large range of large workpieces
Functional features:
Design basis and standard: technical conditions of Leeb hardness tester JB / T 9378-2001; D-type high-precision impact device is adopted;
full Chinese display and menu operation.
it can be equipped with 7 different impact devices, which do not need to be recalibrated during replacement, and can automatically identify the type of impact device.
support measuring various hardness systems.
it can store 373 ~ 2688 groups (impact times 32 ~ 1) of single measurement value, average value, measurement date, impact direction, times, material, hardness system and other information.
The upper and lower limits of hardness value can be set in advance, and the alarm will be given automatically when the limit is exceeded, which is convenient for users to test in batches.
indication software calibration function.
two AA batteries are used, which is convenient and efficient.
Ultra low power management, with long working and standby time.
Technical parameters:
| measuring range | Continuous working time (170-960) HLD, (19-651) Hb, (13.5-101.7) HRB, (17.9-69.5) HRC, (59.1-88) HRA, (80-1042) HV, (30.6 ~ 102.6) HS |
| Measurement direction | Arbitrary (360 °) |
| Applicable materials | Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel |
| Indication error and indication repeatability | D-type impact device ± 6hld (indication error) ± 6hld (indication repeatability) |
| Hardness scale | Shore (HS), Richter (HL), Brinell (HB), Rockwell (HRC / HRB / HRA), Vickers (HV), etc |
| Upper and lower limit setting range | (170-960)HLD |
| Indication calibration | With indication software calibration function |
| data storage | 373 ~ 2688 groups (impact times 32 ~ 1) |
| Continuous working time | About 360 hours (without backlight) |
one Hardness tester host 1 set
two Impact device 1 Type D
three Leeb hardness block 1 piece
four Nylon brush a 1
five Small support ring 1
six USB communication cable Article 1
an instruction manual 1 copy
eight certificate 1 sheet
nine warranty card 1 sheet ten Instrument box 1
eleven Alkaline battery No. 5 Section 2 Non aviation
Select configuration：
one Communication software CD
two Print cable
three printer
WAP端
阿里巴巴
淘宝
