名称：HLN-120 Portable Hardness Tester返回
作者：莱洛特 来源：莱洛特 时间：2022-01-10 浏览次数：
HLN-120 leeb hardness tester
Main features:
With a self-test function, factory parameters recovery function, 5 minutes automatic shutdown function;
Graphic dot matrix lcd (128 * 64) display, not affected by voltage fluctuations;
Two modes of operation, direct mode and menu mode;
With software calibration function, to ensure measurement accuracy;
The machine can be equipped with 7 different impact devices, automatic identification of the impact device type;
Large capacity memory, can store 500 groups (up to 13000 words measured) data.
Application:
The hardness test of the product in the mass production process;
Hardness test of annealing, tempering, quenching and other heat treatment material;
Field test of mechanical permanent assembly parts after installation;
Heavy workpiece, die steel, bearings, gears and other hardness testing;
Failure analysis of pressure vessel, turbogenerator and Its Equipment.
Specifications:
Measuring range 150-960HLD
Test force 360̊
Test material 10 types
Hardness conversion HL,HRC,HRB,HRA,HB,HV,HS
Working voltage 3.3V
Continuous working time About 1000H(backlight shut )
Communication interface standard VSB
Dimension 136*70*20mm
Weight Approx.0.2kg
Standard accessories:
D-type impact device:1 pc
Small supporting ring : 1 pc
leeb standardized hardness block:1pc
Charger:1pc
Adhesives:1 bottle
Main features:
With a self-test function, factory parameters recovery function, 5 minutes automatic shutdown function;
Graphic dot matrix lcd (128 * 64) display, not affected by voltage fluctuations;
Two modes of operation, direct mode and menu mode;
With software calibration function, to ensure measurement accuracy;
The machine can be equipped with 7 different impact devices, automatic identification of the impact device type;
Large capacity memory, can store 500 groups (up to 13000 words measured) data.
Application:
The hardness test of the product in the mass production process;
Hardness test of annealing, tempering, quenching and other heat treatment material;
Field test of mechanical permanent assembly parts after installation;
Heavy workpiece, die steel, bearings, gears and other hardness testing;
Failure analysis of pressure vessel, turbogenerator and Its Equipment.
Specifications:
Measuring range 150-960HLD
Test force 360̊
Test material 10 types
Hardness conversion HL,HRC,HRB,HRA,HB,HV,HS
Working voltage 3.3V
Continuous working time About 1000H(backlight shut )
Communication interface standard VSB
Dimension 136*70*20mm
Weight Approx.0.2kg
Standard accessories:
D-type impact device:1 pc
Small supporting ring : 1 pc
leeb standardized hardness block:1pc
Charger:1pc
Adhesives:1 bottle
WAP端
阿里巴巴
淘宝
