名称：Webster Hardness Tester W-20返回
作者：莱洛特 来源：莱洛特 时间：2022-01-10 浏览次数：
W-20 series aluminum alloy Vickers hardness tester is suitable for testing aluminum alloy profiles, pipes and plates, especially for rapid and non-destructive qualified inspection of product hardness at production site, sales site or construction site
The standard hardness block is tested by the standard hardness machine, and the test report is attached
The Vickers hardness value can be converted into commonly used Vickers, Rockwell, Brinell hardness and tensile strength values
Use a TW hardness tester
Determine whether the workpiece has heat treatment and check the effect of heat treatment
Determine whether the workpiece is machined from an inappropriate alloy
Test long and heavy workpieces or assemblies that are inconvenient to be sent to the laboratory
Used for production inspection, acceptance inspection and quality supervision inspection
Main technical parameters
Range: 0-20hw
Accuracy: 0.5hw
Measurement range: equivalent to 20 ~ 110hre
Weight: 0.5K
Sample size: thickness: 0.4mm-6mm (W-20 Vickers hardness tester)
0.4mm-13mm (w-20a Vickers hardness tester)
Inner diameter of pipe: more than 10mm (W-20 and w-20a Wechsler hardness tester)
Inner diameter of pipe: more than 6mm (w-20b Vickers hardness tester)
Standard configuration Wechsler hardness tester
Main engine: 1 set
Standard hardness block: 1
Spare pressing needle: 1
Correction wrench: 1
Small screw cutter: 1
Instrument box: 1
The standard hardness block is tested by the standard hardness machine, and the test report is attached
The Vickers hardness value can be converted into commonly used Vickers, Rockwell, Brinell hardness and tensile strength values
Use a TW hardness tester
Determine whether the workpiece has heat treatment and check the effect of heat treatment
Determine whether the workpiece is machined from an inappropriate alloy
Test long and heavy workpieces or assemblies that are inconvenient to be sent to the laboratory
Used for production inspection, acceptance inspection and quality supervision inspection
Main technical parameters
Range: 0-20hw
Accuracy: 0.5hw
Measurement range: equivalent to 20 ~ 110hre
Weight: 0.5K
Sample size: thickness: 0.4mm-6mm (W-20 Vickers hardness tester)
0.4mm-13mm (w-20a Vickers hardness tester)
Inner diameter of pipe: more than 10mm (W-20 and w-20a Wechsler hardness tester)
Inner diameter of pipe: more than 6mm (w-20b Vickers hardness tester)
Standard configuration Wechsler hardness tester
Main engine: 1 set
Standard hardness block: 1
Spare pressing needle: 1
Correction wrench: 1
Small screw cutter: 1
Instrument box: 1
WAP端
阿里巴巴
淘宝
